112
Loading Paper in the Sheet Feeder
Power Cleaning
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head
several times, you can run a Power Cleaning.
If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12
hours before running another Power Cleaning.
Caution: Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make
sure each ink tank is at least one-third full before running a Power Cleaning, or it may damage the
product.
Caution: Power Cleaning may cause the ink pads to reach their capacity sooner. When an ink pad
reaches the end of its service life, the product stops printing and you must contact Epson for support.
Power Cleaning Using a Computer Utility
Parent topic: Print Head Maintenance
Related concepts
Print Head Nozzle Check
Related tasks
Checking Ink Levels on Your Product
Refilling the Ink Tanks
Loading Paper in the Sheet Feeder
Power Cleaning Using a Computer Utility
You can run a Power Cleaning using a utility on your Windows or Mac computer.
Note: After running a Power Cleaning, you must turn off the product and wait at least 12 hours before
running another Power Cleaning.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
