141
3. Remove any jammed paper from the rear cover.
4. Press in the buttons and reattach the rear cover.
5. Press the B&W copy or color copy button to clear the error. If the error persists, check the
other paper jam solution.
Parent topic: Solving Paper Problems
Related references
Paper Jam Problems
Related tasks
Cancelling Printing Using a Product Button
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic: Solving Paper Problems
Related references
Paper or Media Type Settings - Printing Software
To Next Page
Loading...
Need help?
General
Weight and Dimensions
