286
LCD screen message Condition/solution
Cannot recognize the
media. See your
documentation for more
details about the media.
Make sure the external storage device meets the specifications.
Cannot use the inserted
Memory Device. See
your documentation for
details.
Print Head Adjustment
Canceled. There is a
problem with the print
head. Contact Epson
Support.
If print quality has not improved after running a nozzle check and cleaning
the print head three times, turn off the product and wait at least 6 hours. Then
run a nozzle check and try cleaning the print head again. If print quality has
still not improved, run a Power Cleaning. If it still has not improved after that,
contact Epson for support.
Install the Epson Event
Manager software on
the computer to use this
feature. See your
documentation for more
details.
Make sure Epson Event Manager is installed on your computer.
Check the following if a
computer is not found.
- Connection between
the printer and the
computer (USB or
network)
- Installation of the
necessary software
- Power supply to the
computer
- Firewall and security
software settings
- Search again
See your documentation
for more details.
Make sure your product and computer are properly connected and all
necessary software is installed. Make sure your computer is turned on. You
may need to adjust the settings in your firewall or security software.
To Next Page
Loading...
