Epson FX-1050 - Vertical Motion

Vertical Motion
Form feeding
FF
Form Feed
Format:
ASCII code: FF
Decimal:
12
Hexadecimal: 0C
Comments:
Prints the data in the print buffer and advances the paper to the top of
the next form according to the current page length.
ESC C
Set Page Length in Lines
Format:
ASCII code: ESC C n
Decimal: 27 67 n
Hexadecimal: 1B 43 n
Comments:
Sets the page length to n lines in the current line spacing. The value of
n must be from 1 to 127. The top of form position is set to the current
line. Overrides the DIP switch page length setting.
ESC C 0
Set Page Length in Inches
Format:
ASCII code: ESC C 0 n
Decimal : 27 67 0 n
Hexadecimal: 1B 43 00 n
Comments:
Sets the page length to n inches. The value of n must be from 1 to 22.
The top of form position is set to the current line. Overrides the DIP
switch page length setting.
8-14
Command Summary