Default Settings
The table below shows the default conditions that become valid when
the printer is initialized.
Vertical tab position
ItemItem
Top of form positionTop of form position
Left and right margins
Line spacing
Horizontal tab positionsHorizontal tab positions
VFU channelVFU channel
Font selectionFont selection
CPICPI
Justification
Special printing effects
Reset to:Reset to:
Current paper positionCurrent paper position
CancelledCancelled
1/6-inch line spacing
Cleared
Every eight charactersEvery eight characters
Channel 0
Channel
Reset to the current SelecType setting
Reset to the current SelecType setting
Left justification
Cancelled
I
In addition, the data buffer is cleared when the printer is initialized by
turning on the power or by an INIT signal.
Note: The userdefined character set is not cleared when the printer is
initialized.
Technical Specifications
A-9
To Next Page
Loading...
