ESCO
Select l/S-inch Line Spacing
Format:
ASCII
code:
ESC 0
Decimal:
27 48
Hexadecimal: 1B 30
Comments:
Sets the line spacing to
l/8
of an inch for subsequent line feed
commands. The 0 is the character zero and not ASCII code 0.
ESC 1
Select
7/72-inch
Line Spacing
Format:
ASCII code:
ESC 1
Decimal :
27 49
Hexadecimal: 1B 31
Comments:
Sets the line spacing to 7/72 of an inch for subsequent line feed
commands. The 1 is the
character
one and not lower case L or ASCII
code 1.
ESC 2
Select l/6-inch Line Spacing
Format:
ASCII code:
ESC 2
Decimal:
27 50
Hexadecimal: 1B 32
Comments:
Sets the line spacing to l/6 of an inch for subsequent line feed
commands. The 2 is the
character
two and not ASCII code 2. This is
the default at power on.
8-16
Command Summary
To Next Page
Loading...
