ESC M
Select 12 cpi
Format:
ASCII code:
ESC M
Decimal:
27 77
Hexadecimal: 1B 4D
Comments:
Selects
12
characters per inch printing. This command is available in
both draft and NLQ.
ESC p
Turn Proportional Mode On/Off
Format:
ASCII code: ESC
n
Decimal:
27
112 n
Hexadecimal: 1B 70 n
Comments:
The following values can be used for n:
1:
Mode is turned ON.
(The ASCII codes 0 and
1
or
the
ASCII
0: Mode is turned OFF.
characters
“0” and
“1” can be
used.)
The width of proportional characters varies from character to
character. Therefore, a narrow letter like i receives less space than a
wide letter like W. The proportional widths are given in the character
tables, which appear in Appendix B. This command overrides
condensed. This command is available for draft, NLQ, and user-
defined characters.
Command Summary
8-25
To Next Page
Loading...
