ESCH
Cancel Double-Strike Mode
Format:
ASCII code:
ESC H
Decimal :
27 72
Hexadecimal: 1B 48
Comments:
Turns off the double-strike mode selected by ESC G.
ESC S0
Format:
ASCII code:
ESC S NUL
Decimal:
27 83 0
Hexadecimal: 1B 53 00
Comments:
Select Superscript Mode
Prints characters about two-thirds of the normal height in the upper
part of the character space. The ASCII code 0 or the character “0” can
be used in this command. It is cancelled with ESC T. This command is
available in both draft and NLQ. It cannot be combined with double-
high.
ESC S1
Select Subscript Mode
Format:
ASCII code:
ESC S
SOH
Decimal :
27 83 1
Hexadecimal: 1B 53 01
Comments:
Prints characters about two-thirds of the normal height in the lower
part of the character space. The ASCII code 1 or the
character
“1”
can
be used in this command. It is cancelled with ESC T. This command is
available in both draft and NLQ. It cannot be combined with double-
high.
8-30 Command Summary
To Next Page
Loading...
