User-Defined Characters
Note: See Chapter 4 for sample programs and full information on this
topic.
ESC &
Define User-Defined Characters
Format:
ASCII code:
ESC &
NUL dl d2 ... dn
Decimal:
27 38 0 d1 d2 ... dn
Hexadecimal: 1B 26 00 dl d2 ... dn
Comments:
This command defines characters as described in Chapter 4. This
command is not effective when DIP switch
l-l
is on.
ESC : Copy ROM into RAM
Format:
ASCII code:
ESC
0 n 0
Decimal:
27 58 0 n 0
Hexadecimal: 1B 3A 00 n 00
Comments:
This command copies the characters in the ROM into RAM so that
specific characters
can
be redefined. The following values can be used
for
n:
0: Roman
1:
Sans Serif
This command is not effective when DIP switch
l-l
is on.
Command Summary
8-35
To Next Page
Loading...
