Commands That Are Different from Epson Commands
Printer Operation
ESC Q3
Format:
ASCII code:
ESC Q 3
Decimal:
27 81 3
Hexadecimal: 1B 51 03
Deselect Printer (FX-850)
Comments:
Places the printer in an off line state until the printer is turned off and
back on or until it receives a DC1 code.
ESC Q22
Deselect Printer
(FX-1050)
Format:
ASCII code:
ESC Q 22
Decimal :
27 81 22
Hexadecimal: 1B 51 16
Comments:
Places the printer in an off line state until the printer is turned off and
back on or until it receives a DC1 code.
Vertical Motion
ESC A
Set n/72-inch Line Spacing
Format:
ASCII code:
ESC A n
Decimal:
27 65 n
Hexadecimal: 1B 41 n
Comments:
Sets the line spacing to
n/72
of an inch. This value is stored in
memory
until the printer receives the ESC
2
command to put it into
effect. The value of
n
must be from 1 to 85.
8-42
Command Summary
To Next Page
Loading...
