You can also feed envelopes with the optional cut sheet feeder. See the
section on the cut sheet feeder in Chapter 7. before loading envelopes
into the cut sheet feeder, you need to adjust the paper thickness lever. See
the
table showing envelope types and recommended lever positions on
page 2-18.
WARNING: When printing on envelopes, be sure that your
application program settings keep the printing entirely within
the printable area of the envelopes as
shown
below.
To make
sure that
the printing fits within this area, always
print a test on a single sheet of paper before printing on
envelopes.
2-20 Paper Handling
To Next Page
Loading...
