Epson GT-30000 Product Information

EPSON GT-30000
3/01 EPSON GT-30000
- 7
Starting EPSON Scan Server
EPSON Scan Server starts automatically whenever the
scanner server is turned on. When EPSON Scan Server is
running, you’ll see either the EPSON Scan Server dialog
box, or the EPSON Scan Server icon on the Windows
taskbar. If you need to start EPSON Scan Server manually,
click
Start
,
Programs
,
EPSON Scan Server
, and then select
EPSON Scan Server
.
You can quit EPSON Scan Server at any time. Just click the
Exit
button on the EPSON Scan Server dialog box.
Before you exit, make sure no client computers are trying to use
the scanner. Don’t exit if the status area of the EPSON Scan
Server dialog box indicates that you are connecting to a client.
Wait until you see the message Waiting for connection.
If you installed EPSON TWAIN HS on the scanner server so
that you could make a direct connection to the scanner,
remember that you must exit EPSON Scan Server to use
EPSON TWAIN HS. EPSON Scan Server disables EPSON
TWAIN HS.
Starting EPSON TWAIN HS Network
You connect to the scanner server by starting EPSON
TWAIN HS Network on your client computer. Follow these
steps:
1. Start your host application.
2. Select EPSON TWAIN HS Network as your source, or
scanner driver. (You only need to do this step once.)
For example, if you’re using Presto! PageManager for
EPSON as your host application, choose
Select Source
from the File menu. In the Select Source window, choose
EPSON TWAIN HS Network
and click
Select
.
The command you choose from the File menu depends on the
host application. With some applications, for example, you
might choose Import or Select TWAIN_32 Source.
3. Start EPSON TWAIN HS Network.
If your host application is Presto! PageManager for
EPSON, choose
Acquire
from the File menu. When
EPSON TWAIN HS Network starts, the EPSON TWAIN
HS Network main menu appears and you connect to the
scanner server.
Since the settings and controls for EPSON TWAIN HS
Network are the same as those for EPSON TWAIN HS, see
“Scanning with EPSON TWAIN HS” on page 5 for general
scanning instructions. For more detailed information about
settings, see the EPSON GT-30000 Reference Guide on your
scanner software CD-ROM.
Starting a Scan
You can start a scan on your network scanner in several
ways. However, the client computer must be running
EPSON TWAIN HS Network to connect to the scanner
server.
❏ You can start EPSON TWAIN HS Network on the client
computer from a host application, make your scan
settings, and click the
Scan
button on the EPSON TWAIN
HS Network main window. The scanned image is
imported into your host application’s window.
❏ You can press the Start button on the scanner to send
the scanned image to the client computer that is currently
connected to the scanner server.
click to exit
click to start a scan from
the scanner server

Epson GT-30000 Specifications

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption operating without ADF	65W
power consumption operating with ADF	90W
power consumption standby without optional unit	12W

Operating Environment

temperature operating	41ºF to 95ºF (5ºC to 35ºC)
humidity operating	10% to 80% (no condensation)
humidity storage	10% to 85% (no condensation)

Scanning Specifications

optical resolution	600 x 1200 dpi with Micro Step Drive™ technology
maximum resolution	9600 x 9600 dpi with interpolation
effective pixels	7020 x 10200 pixels (600 dpi)
color depth internal	36 bits per pixel
color depth external	24 bits per pixel (selectable)
grayscale depth internal/external	12 bits per pixel
grayscale depth external	8 bits per pixel
scanning speed at 1600 dpi, draft mode, color	0.79 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, grayscale	0.39 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, art	0.39 msec/line (approx.)

Weight and Dimensions

maximum read area	11.7" x 17.0" (297mm x 432mm)
width	25.9" (658mm)
depth	19.2" (488mm)
height	10.0" (254mm)
weight	66 lb (37.5 kg approx.)