Epson GT-30000 Product Information

EPSON GT-30000
4 - EPSON GT-30000
3/01
Option Interface Connector
Interface type For use with the automatic
document feeder (B813212)
Output voltage 21.6 to 26.4 VDC
4.75 to 5.25 VDC
Output current 0.6 A (24 V)
0.3 A (5 V)
Automatic Document Feeder
General
Paper
input/output Load face up; eject face down
Paper quantity 100 pages (80 g/m
2
paper, maximum
total
thickness under 0.48 inches [12 mm])
Reliability 100,000 sheets (load/eject MTBF)
Dimensions Width: 23.8 inches (606 mm)
Depth: 19.2 inches (488 mm)
Height: 5.3 inches (134 mm)
Weight Approximately 28.6 lb (13 kg)
Electrical
Input voltage 22.8 to 25.2 VDC
4.75 to 5.25 VDC
Input current 24 V: 1.5 A
5 V: 0.4 A
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Standby:
−
13 to 140 °F (
−
25 to 60 °C)
Humidity (without
condensation) Operating: 10 to 80%
Standby: 10 to 85% or less
Lights and Buttons
The scanner has two indicator lights and two buttons on its
control panel. Light status and button functions are
described in the tables that follow.
Scanner indicator lights
N = on, F = flashing
Error conditions
N = on, O = off, F = flashing
Scanner buttons
Light Light status Scanner status
READY
N Ready to scan images
F (flashing) Scanning is in progress or the scanner is
being initialized
ERROR
N
F (rapidly flashing)
An error occurred; see the following
table for more information
ERRO
R light
READ
Y light Error type
N N Command error: The scanner has received incorrect
commands from your scanning software. Try
rescanning the document.
F
O
Interface error: Check that your scanner is securely
connected to your computer, and then turn the
scanner off and back on again.
F F Fatal error: Check that the transportation lock is
released, and then turn the scanner off and on again.
If this doesn’t solve the problem, call your EPSON
dealer.
O
N
Option error: There’s a problem with an installed
option (EPSON TWAIN will report the error
condition). Check to make sure the automatic
document feeder is flat against the document table.
Check that your option is securely connected to the
option connector at the back of the scanner. Finally,
check that the automatic document feeder isn’t out
of paper and doesn’t have a paper jam. If these
suggestions don’t solve the problem, call your
EPSON dealer.
Button Function
P Operate Turns the scanner on and off.
Start Automatically launches a Start button-
compatible application. You must set up your
scanner software and a compatible application to
use this button.
If you installed NewSoft™ Presto!™
PageManager, it’s automatically assigned to the
Start button. You can set up Presto! PageManager
to scan your image automatically and send it
directly to another application or a peripheral
device, such as a printer.

Epson GT-30000 Specifications

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption operating without ADF	65W
power consumption operating with ADF	90W
power consumption standby without optional unit	12W

Operating Environment

temperature operating	41ºF to 95ºF (5ºC to 35ºC)
humidity operating	10% to 80% (no condensation)
humidity storage	10% to 85% (no condensation)

Scanning Specifications

optical resolution	600 x 1200 dpi with Micro Step Drive™ technology
maximum resolution	9600 x 9600 dpi with interpolation
effective pixels	7020 x 10200 pixels (600 dpi)
color depth internal	36 bits per pixel
color depth external	24 bits per pixel (selectable)
grayscale depth internal/external	12 bits per pixel
grayscale depth external	8 bits per pixel
scanning speed at 1600 dpi, draft mode, color	0.79 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, grayscale	0.39 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, art	0.39 msec/line (approx.)

Weight and Dimensions

maximum read area	11.7" x 17.0" (297mm x 432mm)
width	25.9" (658mm)
depth	19.2" (488mm)
height	10.0" (254mm)
weight	66 lb (37.5 kg approx.)