Useful Functions
50
Connection example 1: Viewing without an AV amplifier (audio is output from the Optical Audio-
Out port)
Audio is output from the sound bar connected to the Optical Audio-Out port. Use a commercially available
optical digital cable to connect to the sound bar.
c
•
When connecting a device, such as a sound bar, to the Optical Audio-Out port on the WirelessHD
Transmitter, check that Audio Out Device is set to WiHD Transmitter (Optical).
sSettings - HDMI
Link - Audio Out Device p.75
•
The following conditions mus t b e m e t wh en y ou w ant t o out pu t ima ges fr om mo ni t or d ev i ces inc lu d ing
TVs that support 18 Gbps transmission band, such as 4k60p/4:4:4.
- Connect the monitor device to the HDMI Out port with a Premium HDMI cable.
- Connect the AV device to the HDMI Input1 or HDMI Input2 port.
•
You cannot output some audio from the Optical Audio-Out port due to restrictions in audio standards
*
.
- Lossless audio
- Lossy high-bandwidth audio
- Immersive audio
* This is the specifications as of June 2018. This will be changed in the future.
To Next Page
Loading...
