7
For Use with a Computer
7-11
2. Choose
Chooser
from the Apple menu. Then click your
printer’s icon and the port your printer is connected to.
Note:
❏
If you are using an AppleTalk network, an alert message may
appear when you click the port. In this case, reselect the other
port, or make the AppleTalk setting
Inactive
then select the
port again.
❏
If you are using your Macintosh in an Ethernet environment,
you can connect your printer to either the printer or modem
port and leave the AppleTalk setting
Active
.
3. Click the
Background Printing
radio buttons to turn
background printing on or off. When background printing is
on, you can use your Macintosh while it is preparing a
document for printing. You must turn on background
printing to use the EPSON Monitor3 utility to manage print
jobs.
4. Close the Chooser.
For information on opening and using the software, see “Printing
Your First Page for Macintosh” on page 7-17. See also “Using the
Printer Software for Macintosh” in the online
User’s Guide
.
To Next Page
Loading...
