3-20
Printing Photo Directly with PC Cards
Printing continuously different photos
To print different photos in the same PC card continuously, follow
the instructions below.
❏
Load the same size paper as before.
❏
While printing, repeat steps 2 to 5 as described on page 3-18.
Printing a Selected Range of Photos
It is possible to select a continuous range of photographs on the
PC card and print them one after another.
Note:
Before starting printing, put some paper and a PC card containing
digital photographs in the printer.
See “Loading Paper” on page 3-2.
See “Loading PC Cards” on page 3-10.
1. Press the
Range
button to select the Range mode.
The Range light turns on.
2. Make sure that the cursor is positioned at the Photo No.
setting in the SELECT menu, then press the
Change Settings
buttons to select the photo number for the From.
Range
S
E
L
E
C
T
Photo No.
Copies
Photo No.• • •
From
To
To Next Page
Loading...
Need help?
General