Epson IP-100 - System Requirements

7-2
For Use with a Computer
System Requirements
For PCs
To use your printer, you need Microsoft
®
, Windows
®
95,
Windows
®
98, or Windows
®
NT 4.0, and a shielded, twisted-pair
parallel cable.
Your computer should also meet the following system
requirements:
Your computer dealer can help you update your system if it does
not meet these requirements.
For Macintosh computers
To use this printer, your Apple
®
Macintosh
®
must meet the
following system requirements. You also need a standard Apple
System Peripheral-8 cable (8-pin mini-circular connector).
Minimum system Recommended system
i486/25 MHz for Windows 95 and NT 4.0
i486/66 MHz for Windows 98
Pentium or higher
processor
16MB RAM 32MB RAM or more for
Windows 95 and 98,
64MB or more for
Windows NT 4.0
10MB hard disk space for Windows 95 and 98
20MB for Windows NT 4.0
50MB or more free disk
space for Windows 95
and 98
100MB or more for
Windows NT 4.0
VGA monitor VGA or better monitor