Epson L-300 - SETTING UP YOUR CAMERA

18
SETTINGUPYOURCAMERA
Thefirsttimeyouusethecamera,you
mustsetthefollowingthreeitems.You
willonlyneedtodothisonce.
SETTINGUPYOURCAMERA
TurningonthePower
TurningoffthePower
Turnonthecamerabypressingthe
POWERbutton.Thelenscoverwillopen
automatically,andthelenswillextend.
PressingthePOWERbuttonagainwillturn
thepoweroff.Thelenswillautomatically
retractandthelenscoverwillclose.
Whenthecameraisleftonforalongperiodof
timewithoutbeingused,itwillautomaticallyshut
downtosavethebatteries.(Seepage82.)
INITIALSETTINGS
2.SettingDate&Time
3.SettingtheVideoOutSignal
1.SelectingaLanguage
ThefirsttimeyouturnonthePOWER,the"Language"screen
appears.Usethe▲▼buttonstoselectEnglish,thenpressthe
FLASHbutton.
(
Seepage87.)
MACRObutton
FLASHbutton
button
button
button
button
Nextthescreen"Date/Time"willappearwiththeyear
highlighted.
Usethe ▲▼buttonstochangethenumbers.
Usethe
▲
▼
buttonstohighlightthenextitem.
Pressthe
FLASHbuttontosavethesettings.
Pressthe
MACRObuttontoreturntoprevioussettings.
Holddownthe ▲▼ buttonstoscrollfaster.
Youmaychangethesesettingsatalaterdate.
(
Seepage83.)
ThelastscreenwillsayVideoOut.
Usethe▲▼buttonstohighlightPALorNTSC.Thenpressthe
FLASHbuttontosave.
(
Seepage87.)
Initialsettingsarecomplete.
POWERON/OFF
POWERbutton