Epson L-300 - Installing Frames

49
INSTALLINGFRAMES
Usingthe▲▼buttons,select"P.I.F.
Frames"thenpresseitherthe
▲
buttonorthe FLASHbutton.
Whenyouwanttoinstallframes
fromthememorycardtothe
camerausethe
▼ 
buttontochoose
"InMemoryCard",thenusethe▲▼
buttonstoselectthedesiredframe.
Onceyoupressthe FLASHbutton,aconfirmationmessage
willappearonthemonitor.Pressthe FLASHbuttonagainto
installtheframe.
Ifthereisnotenoughmemoryspaceavailableoneitherthecameraorthememorycard,the
messages"Notenoughfreespaceonthememorycard"or"Notenoughfreespaceinthe
camera'smemory"willappearonthemonitor.Inthiscase,youmustdeleteanyframesyoudon't
needinordertomakeenoughroomforanotherframe.
TurntheDIALSWITCHtoSETUPMODEand
thenturnthePOWERON.
Pressthe MACRObuttontostoptheprocess.
Totransfertheframesstoredinthecamerause
the
▼
buttontoselect"InCamera".Usethe▲▼
buttonstoselecttheframesyouwant.
Howtoinstallframesfromthememorycardtothecamera'smemoryorvice
versa.Youcanstoreupto2framesinthecamera.
REPLACINGFRAMES
Pressingthe MACRObuttonwilldeletetheframe.
Pressingthe MACRObuttonwilldeletetheframe.