Epson L-300 - If the Captured Image Is out of Focus Frame ̶̶̶̶̶̶̶̶̶̶̶̶26

Indicatorlight(green)
26
THEIMAGESYSTEM
IFTHECAPTUREDIMAGEISOUTOFFOCUSFRAME
Placethesubjectinthecenterof
thefocusframe.
Presstheshutterbuttonhalfwayto
setfocus.
Whenfocusisset,theindicatorlightstopsblinking
onboththeLCDmonitorandtheVIEWFINDER.
Maintainthehalfwayshutterbutton
positionandifyouwish,reposition
theframingtoyourliking.
TheautomaticfocusworksonlyifthesubjectisintheFOCUSFRAMEwhile
theSHUTTERbuttonisfirstpressedhalfwaydown.Afterthefocusislocked
onthesubject,youcanadjusttheframetothedesiredcompositionand
releasetheSHUTTER.
Presstheshutterbuttoncompletely
totakethephoto.
Theshuttersoundindicatestheshutterhas
released.
TurntheDIALSWITCHtoPHOTOMODE,and
thenturnthePOWERON.
JustaswhenusingtheLCDmonitortocompose
theshot,youmustputtheobjecttobefocusedon
inthecenteroftheviewfinder.