Epson L-300 - Resetting Video out; Setting the Menu Language

87
Youmayhavetoresetthe"videoout"tomatchthenationalvideosystemof
whereveryoumaybeshowingpictures.
SETTINGTHEMENULANGUAGE
RESETTINGVIDEOOUT/SETTINGTHEMENULANGUAGE
YoucanchangethelanguagedisplayedontheLCDmonitor.
Usethe ▲▼buttonstochoose
"Videoout".
Usethe
▲ ▼
buttonstochangethe
setting.
Usethe ▲▼buttonstochoose
"Language".
Usethe
▼
buttonstoselectthe
languagelist.
Usethe ▲▼
▲ ▼
buttonstohighlight
thelanguageyouwanttousefor
theLCDmonitor.Pressthe FLASH
buttontoconfirmtheselection.
RESETTINGVIDEOOUT
TurntheDIALSWITCHtoSETUPMODEand
thenturnthePOWERON.
TheSETUPmenuwillappearontheLCDmonitor.
TurntheDIALSWITCHtoSETUPMODEand
thenturnthePOWERON.
TheSETUPmenuwillappearontheLCDmonitor.
AboutVideoSignals
Therearetwoavailablesettings,NTSCandPAL,
eachusedindifferentcountries.