Epson L-300 - Auto Power Save; Resetting the Auto Power Save

84
AUTOPOWERSAVE
WhenusinganACadapter
WhenyouareusinganACadapter,thecamerawillentersleepmodeafter20minutes(no
matterwhatthesettings).Thecamerawillautomaticallyturnoff5minutesafterithasentered
sleepmode.
Usethe ▲▼buttonstochoose
"PowerSave".
Usethe
▲ ▼
buttonstochangethe
setting.
TurntheDIALSWITCHtoSETUPMODEand
thenturnthePOWERON.
TheSETUPmenuwillappearontheLCDmonitor.
RESETTINGTHEAUTOPOWERSAVE
Whenthecameraisturnedonbutinactiveforaperiodoftime,thecamera
automaticallyshutsdowntosavebatterypower.
AUTOPOWERSAVE
Whileinsleepmode,thegreenlightwillflash.The
LCDmonitorwillturnoffandtheCPUwillalsobe
insleepmode.
YoucanchangethesettingforAutoPowerSave.Thedefaultis3minutes,but
youcanalsochoose1,5or20minutes.
TocancelSleepmode,presstheSHUTTERbutton,or
anyotherbuttononthebackofthecamera.Youcan
alsosimplyturntheDIALSWITCH.
WhenthecameraisleftinSleep
modeforover10minutes,itwill
shutdownautomatically.
Whenthereisnoactivityforover3
minutes,thecamerawillentersleep
mode.
Indicatorlight(green)
LCDmonitor
Thelenswillretractandthelenscoverwillclose.