Epson L3150 Series - Lights and Printer Status

+
Restore Default Network Settings
Turn the printer on while holding down the
button to restore the default network
settings. When the network settings are restored, the printer turns on and the network status
lights ash alternately.
+
Print Nozzle Check Pattern
Turn the printer on while holding down the
y button to print the nozzle check pattern.
Lights and Printer Status
Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status Solutions
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
or button.
User's Guide
Printer Basics
16