147
2. Select Settings.
3. Select General Settings.
4. Scroll down and select Fax Settings.
5. Scroll down and select Fax Setting Wizard.
The Fax Setting Wizard screen appears.
6. Select Proceed.
7. On the Fax Header screen, use the displayed keypad to enter the sender name for your fax source,
such as your name or a business name. You can enter up to 40 characters.
8. On the Your Phone Number screen, use the displayed keypad to enter your fax number, up to 20
characters.
Note: The name and phone number in the fax header identifies the source of the faxes you send.
9. On the Distinctive Ring Setting screen, do one of the following:
• If you have subscribed to a distinctive ring service from your telephone company, select Settings.
Select the ring pattern to be used for incoming faxes or select All.
• If you do not have a distinctive ring service, select Skip.
Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each
number is assigned a different ring pattern. You can use one number for voice calls and another for
To Next Page
Loading...
Need help?
General
Weight and Dimensions
