Using Epson Remote!
To make changes to the default settings with Epson Remote!,
follow these steps:
1.
2.
3.
4.
5.
6.
7.
8.
Change to the directory you specified, for example:
C:\EPREMOTE\.
Type
PANEL (C:\EPREMOTE\PANEL),
and press
Enter.
You’ll see the printer settings that can be changed while the
printer is on, for example, the bin selection and print direction.
Change the desired settings.
Press
F1
to save the settings. (The settings are then sent to the
printer.)
Press
F2
to leave the menu.
Type
PRNSET (C:\EPREMOTE\PRNSET),
and press
Enter.
You’ll see the printer’s default settings, which are described in
“Changing the Default Settings” in Chapter 3.
Change the desired settings.
Press
F1
to save your settings and
F2
to leave the menu.
Setting Up the Printer
1-19
To Next Page
Loading...
