Other control panel features
The control panel also gives you to access to several other
functions. To activate the functions listed below, turn on the
printer while pressing one of buttons, as follows:
Load/Eject
Performs a letter quality self test.
See Chapter 1 for details.
LF/FF
Performs a draft self test. See
Chapter 1 for details.
Pitch
Activates the Default Setting mode.
See “Changing the Default Settings”
in this chapter.
Load/Eject
and
LF/FF
Prints a data dump. All the input
data are printed as hexadecimal
numbers and corresponding
characters. See “Problems and
Solutions” in Chapter 6.
Pause
Starts the Bi-d adjustment. See “Bi-d
Adjustment” in this chapter.
3-6
Using the Printer
To Next Page
Loading...
