Epson LQ-300 + - Printing Specification

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Product Description SPECIFICATIONS 6
1.2.2 Printing Specification

Print method: Impact dot matrix

Number of pins: 24 pins

Print pin arrangement: 12 x 2 staggered

Print pin diameter: 0.29 mm (0.0114 inch)

Color (Option): Black, Magenta, Cyan, Yellow

Print direction: Bi-direction with logic seeking

Print speed and printable columns:

Resolution:
*1: Not described in this manual.

Control code: ESC/P 2 and IBM 2390 Plus emulation
(Refer to 1.5 "Control codes")
Printing mode
Character
pitch (cpi)
Printable
columns
Printing speed (cps)
Normal Copy
High speed draft 10 80 300 266
Draft 10 80 325 200
12 96 270 240
15 120 337 300
Draft condensed 17 137 192 170
20 160 225 200
LQ 10 80 75 66
12 96 90 79
15 120 112 99
LQ condensed 17 137 128 112
20 160 150 132
NOTE: When the power supply voltage drops to the lower limit, the printer
stops printing and then starts printing the rest on the line more slowly
than before.
NOTE: When the head temperature rises to the upper limit, the printer stops
printing.
When the head temperature falls to the normal level, the printer starts
printing again and more slowly than before.
Printing mode
Horizontal density
(dpi)
Vertical density
(dpi)
Adjacent dot print
High speed draft 90 180 No
Draft 120 180 No
Draft condensed 240 180 No
LQ 360 180 No
8 pin bit image 60, 80, 90 or 120 60 Yes
120 or 240 60 No
24 pin bit image 60, 80, 90 or 120 180 Yes
120 or 240 180 No
Raster graphics
*1
180 or 360 180 or 360 Yes