Epson LQ-300 + - PG Sensor Removal; Release Lever Position Sensor Removal

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Disassembly and Assembly Disassembly and Assembly 67
4.2.7.8 PG Sensor Removal
1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
2. Release 2 hooks of the PG sensor securing it to the left frame with tweezers and
remove the sensor.
3. Remove the harness from the sensor (white).
Figure 4-18. PG Sensor Removal
4.2.7.9 Release Lever Position Sensor Removal
1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
2. Release 2 hooks of the release lever position sensor securing it to the right frame
with tweezers and remove the sensor.
3. Remove the harness from the sensor (blue).
Figure 4-19. Release Lever Position Sensor Removal
Left frame
PG sensor (white)
Hook
C A U T I O N
When installing the release lever position sensor, be sure to insert
it between the release lever and the right frame.
Release lever position sensor (blue)