HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Disassembly and Assembly Disassembly and Assembly 58
4.2.2 Upper Housing Removal
1. Remove platen knob, cover assembly, printer, tractor unit and paper eject unit.
Remove the color upgrade kit if it is installed.
2. Set the release lever to the tractor feed.
3. Remove 4 screws (CBP, 3x10, Torque: 0.78-0.98N.M) securing the upper housing
to the lower housing.
4. Remove the upper housing.
Figure 4-2. Upper Housing Removal
Upper Housing
CBP (3x10)
CBP (3x10)
C H E C K
P O I N T
When installing the upper housing, be sure to insert LEDs
on the panel board to the LED holes of the upper housing.
Upper Housing
LED
Panel Board Assembly
To Next Page
Loading...
