Epson LQ-300 + - Page 80

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Adjustment Overview 75
10. The following screen appears. By using
↑
or
↓
key to shift “>” mark, select “Out
Going” and press ENTER.
11. “Main MENU” appears. By using
↑
or
↓
key to shift “>” mark, select “(1) Bi-D
Adjust” and press ENTER.
12. The printing mode select menu for Bi-D adjustment appears. Use
↑
or
↓
key to
select the printing mode “Mode 1”and use
←
or
→
key to change Bi-D values.
After selecting them, press SPACE. Bi-D Printing starts.
NOTE: Mode 1: Normal Draft
Mode 2: Bit Image 90 dpi
Mode 4: LQ
EHK USASTD
ETT USASTD
ECC(Kver) DEFSTD
Table 5-3. Destination Setting
Destination Setting