Course and Rudder Angle Printer
Introduction
Edition: 001 1 10000001193
Introduction
Preliminary Remarks
The present manual is a description and reference book only. It is intended to answer
questions and to solve problems in the quickest possible manner.
Read and follow the instructions and notes in this manual before operating the equipment.
For this purpose, refer to the table of contents and read the corresponding chapters
thoroughly.
If you have any further questions, contact us under the following address:
Anschütz GmbH Tel. +49 431 / 3019 - 0
Zeyestr. 16 - 24
24106 Kiel Email: service@anschuetz.com
Germany www.anschuetz.com
All rights reserved. It is not allowed to copy any part of this manual, neither mechanically,
electronically, magnetically, manually nor otherwise. It is not allowed to store it in a
database, or distribute or forward it without written permission of Anschütz GmbH.
Copyright:
Anschütz GmbH
Zeyestr. 16 - 24
24106 Kiel
Germany
Errors can hardly be avoided in the documentation despite all efforts. Therefore, we
appreciate any remarks and suggestions.
Subject to alterations.
Change History
Tab. 1: Change History
Date Change Remarks
November 2021 Edition: 001 New Edition
Safety
General Safety Regulations
The following safety symbols are used in this manual:
To Next Page
Loading...
