Course and Rudder Angle Printer
3 Transport and Storage
10000001193 8 Edition: 001
Color Indication Inside Humidity Necessary Action
40 % patch: pink > 40 % Desiccants must be replaced
50 % patch: pink > 50 %
Components / devices must be checked for hu-
midity,
Desiccants must be replaced,
Packaging must be checked for damages
Note
Opening and closing the packing to exchange the desiccants must be done by
authorized packing specialists only.
3.2 Transport
During the transport of the components / devices, the following regulations have to be met:
• Protect the equipment by corresponding packing material against damage
• Protect the equipment against dirt and dust by suitable means
• Handle the equipment carefully by suitable means
• Adhere the following environmental parameters requirement:
Transport temperature -30 °C to +70 °C
Humidity < 80 % relative humidity, non-condensing
Atmospheric pressure 600 hPa to 1.400 hPa
• If available, check the humidity indicator inside the packing regularly.
• No special transport regulations are applicable.
To Next Page
Loading...
