Epson LQ-350 - List of Further Documents; List of Annex Drawings; Tab. 2: List of Further Documents; Tab. 3: Dimensional Drawings

Course and Rudder Angle Printer
Introduction
Edition: 001 3 10000001193
3 Dissipative Shoes
4 Floor Mat
5 Wrist Band
6 Wrist Strap
7 Common Ground
8 Ground Point
Any product which is labeled as shown is electrostatic sensitive.
If proper Electrostatic Discharge (ESD) precautions are not taken, handling or working on
this product results in damage. Every action must be done under ESD protection.
The product and all electronic parts of the product are susceptible to ESD. The product
must be handled with ESD protection especially when removing the covers, touching the
connectors or handling the product components.
All ESD sensitive parts must be packed in metallized protective bags during shipping and
handling outside any ESD Protected Area (EPA). ESD protected spare parts packages
must not be opened / closed out of an EPA.
All necessary equipment for these protective measures can be supplied (on special order)
by Anschütz.
List of Further Documents
Tab. 2: List of Further Documents
Documentation
No.
Designation
epson375160eu Setup Guide
List of Annex Drawings
Tab. 3: Dimensional Drawings
Drawing No. Designation
104-034.HP010 Course and rudder angle printer 230 V
Tab. 4: Wiring Drawings
Drawing No. Designation
104-034.HP012 Course and rudder angle printer 230 V