Printing Labels | 19
Adding punctuation
Besides the basic punctuation shown on the
keyboard and in the symbols library, you can
select from additional punctuation marks.
■ Press repeatedly until you see the
mark you want, then press .
■ Press + repeatedly to scroll
through even more punctuation marks.
Adding letters with accent marks
You can choose from a list of accented
letters.
1. Enter the letter that needs an accent
mark.
2. Press . A list of options appears on
the display (for example, ÀÁÂ).
3. Use the button to highlight an item,
then press to select it.
Printing Labels
■ Press to print and cut the current
label.
The width and approximate length of the
label and the number of copies shows on
the display while the label prints.
■ To cancel printing, press .
■ To select a saved label for printing, press
or until you see the one you
want.
■ To preview your label before printing,
press . The label design scrolls across
the display.
■ To turn off the Auto Cut setting, press
+, select Auto Cut, then select
Off and press .
To Next Page
Loading...
