Printed Ribbons | 25
If you need a longer ribbon, add spaces
or repeat the text and symbols.
Tip: If you turn off the Auto Cut setting, you
can use the Print copies feature to create a
repeated design (by pressing ). For more
information, see the online User’s Guide.
2. Print your ribbon.
3. Tie the ribbon around an elastic ponytail
holder. Or, tie a bow and glue it to a
plastic hair clip.
Make sure you twist the ribbon when
tying it so you can see the printed design
on both ends.
Ornaments with ribbon hangers
Printed ribbon makes a perfect Christmas
ornament hanger.
1. To add length to one end of the ribbon
(unprinted), press + , then select
Tape feed. Repeat this process to add
more length to the end of the ribbon.
2. Create your ribbon design with vertical
text and symbols.
Tip: Press and select Vertical.
3. Make sure you add enough spaces at the
end of the ribbon so that you can loop it
through the ornament hook.
4. Print your ribbon.
5. Thread the ribbon through the ornament
hook and tie the ends together as shown.
6. Hang your ornament on the tree.
To Next Page
Loading...
