Important Safety Instructions
1. Read all of these instructions before you set up your printer.
2. Follow all warnings and instructions marked on the printer.
3. Unplug this printer from the wall outlet before you clean it.
Use a damp cloth for cleaning and do not use liquid or aerosol
cleaners.
4. Do not use your printer near water or spill any liquid on it.
5. Do not place the printer on an unstable cart, stand, table, or
other surface that may allow the printer to fall.
6. Do not block any slots or openings in the cabinet. These are
provided for the ventilation necessary to ensure reliable
operation and protection from overheating. Placing the printer
on a bed, sofa, rug, or other similar surface may block the
openings. Also, do not place the printer in a built-in
installation, such as a bookcase, unless proper ventilation is
provided.
7. Never place the printer near or over a radiator or heat register.
8. Use the type of power source indicated on the label. If you are
not sure of the type of power available, consult your dealer or
local power company.
9. This printer may be equipped with a plug having a third
(grounding) pin, which fits only into a grounding-type outlet.
This is a safety feature. If you are unable to insert the plug into
the outlet, have an electrician replace your obsolete outlet. Do
not defeat the purpose of the grounding-type plug.
10. Do not put your printer where the cord will be walked on.
R
Blueberry REV.E
A5 size Introduction
95/04/17
Introduction
3
To Next Page
Loading...
Need help?
General
