Epson LX-300 User Manual

The guarantee is restricted to the performance of the product
alone, and Epson (UK) Limited does not accept responsibility for
any consequential loss or damage, nor claimed or implied
performance, when the product is used in any combination with
other equipment or program software.
Product guarantee may be invalidated as a result of excessive or
inappropriate use, use in an adverse environment or in conditions
outside the specifications or if the product has been subjected to
unapproved modifications.
The guarantee does not cover visits to the user’s premises or the
repair or commissioning of the product on site.
Use of options
Epson (UK) Limited shall not be liable against any damages or
problems arising from the use of any options or consumable
products other than those designated as Original Epson Products
or Epson Approved Products by Epson (UK) Limited.
Safety information
Warning
:
This appliance must be earthed. Refer to rating plate for
voltage and check that the appliance voltage corresponds to the supply
voltage.
Important
:
The wires in the mains lead fitted to this appliance are
coloured in accordance with the following code:
Green and yellow — Earth
Blue — Neutral
Brown — Live
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in
the plug which is marked with the letter E or with the earth
symbol (
G
) or coloured green or green and yellow.
R
Blueberry REV.E
A5 size Front
95/04/17
v

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%