Epson LX-300 User Manual

If you hold down the
FONT
button while you turn on the printer,
you enter the Printer Setting mode, where you can change many
of the printer’s settings. For more about printer settings, see
page 2-19.
LF/FF
button
During normal operation, you can press this button briefly to feed
paper line by line. Hold it down to load a single sheet, or to
advance continuous paper to the next top-of-form position. You
can also press
LF/FF
to eject a page.
If you want to make sure the printer is working correctly, you can
also use this button to run the self test. To start the self test, hold
down the
LF/FF
button while you turn on the printer. For
complete instructions, see page 1-10.
PAUSE
button
Press the
PAUSE
button to stop the printer temporarily during
printing or the self test. Press it again to resume activity.
PAPER PARK
Press the
FONT
and
LF/FF
buttons together to feed continuous
paper backward to the paper-park position. See “Printing with the
push tractor.”
MICRO ADJUST
Feeds paper forward or backward to adjust the loading position.
See “Adjusting the loading position.”
R
Blueberry REV.F
A5 size Chapter 2
95/05/25
Using the Printer
2-3

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%