26
Print Test Page
After installing the APD, execute test print to check if the APD is properly installed and work
normally.
Perform Print Test Page in the following procedures.
1
Open the Printers screen from [Start] - [Control Panel]. Right click the
printer driver you have installed and select [Properties].
2
The Properties screen of the printer appears. Click the [Print Test Page]
button to start test printing.
3
The following screen appears. If the test print was output correctly, click
the [OK] button. If the test print was not output correctly, click the
[Troubleshoot...] button and perform troubleshooting in accordance
with the Windows message.
• Print Test Page of the APD does not print all the data, unlike normal Print Test Page
does.
• The Print Test Page prints characters and images as an image. The data volume is large
for serial connection and may take longer to print compared with other interfaces.
To Next Page
Loading...
