4
4
Set your country
(Australia and New
Zealand only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a Check that the power is turned on by
connecting in the power cord.
b Press your country (Australia or
New Zealand).
c If the LCD shows the correct country, press
Yes, and then go to step d. Or press No, and
then go back to step b and choose the country
again.
d
After the LCD shows
Accepted
for a few
seconds, the machine will restart automatically.
After the restart, the LCD shows
Please Wait
.
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if you
have an external answering machine. See
Choose a Receive Mode on page 8. Detailed
information uuBasic User’s Guide: Connecting
an external TAD (telephone answering device)
1
2
(Example for Australia)
To Next Page
Loading...
Need help?
General
