8
8
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
uuBasic User’s Guide: Using Receive Modes
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press Receive Mode.
d Press s or t to display Fax Only, Fax/Tel,
External TAD or Manual.
Press the desired receive mode.
e Press Stop/Exit.
9
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu.
b Press General Setup.
c Press s or t to display LCD Settings.
Press LCD Settings.
d Press LCD Contrast.
e Press d or c to choose the contrast level.
Press OK.
f Press Stop/Exit.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
You control the
telephone line and must
answer every call
yourself.
Do you want the machine to
answer fax and telephone calls
automatically?
Manual
Fax Only
Fax/Tel
External TAD
No
Yes
Yes
No
No
Yes
Are you using the voice message
function of an external telephone
answering device?
To Next Page
Loading...
Need help?
General
