9
10
Set the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press Date&Time.
d Enter the last two digits of the year on the
Touchscreen, and then press OK.
To move the cursor to the left, press and
re-enter the number.
e Repeat for month/day/time in 24-hour format.
f Press Stop/Exit.
11
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
Information on how to enter text uuBasic User’s
Guide: Entering Text
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Station ID.
Press Station ID.
d Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
f Press Stop/Exit.
(e.g. Enter 1 2 for 2012.)
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press to delete it and re-enter
the correct character.
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
To Next Page
Loading...
Need help?
General
