(5) Create a print mode that is often used with the RIP.
*
U “Creating Print Modes Often Used with the RIP” on page 21
Print Jobs
If you are printing as a continuation of the preparations for printing, you do not need to do step (1).
(1) Load media in the printer and select the media setting number.
Correctly load the media and select the media setting number that has been registered to the printer.
See Operator's Guide (booklet/online manual) for details about the procedure.
(2) Read the print data to the RIP, and then print it.
*
U “Print Operations” on page 26
Epson Manual for RIP Printing (ONYX RIP)
Introduction
6
To Next Page
Loading...
