Epson Perfection 1200U - Page 91

84
If you need to reinstall your
scanner software in Windows . . .
Note: You must uninstall the
EPSON scanner software before
reinstalling it; the steps are included
below.
1. Open the Windows Control
Panel.
2. Double-click
Scanners and
Cameras
.
3. Highlight the
Perfection 1200
entry.
4. Click
Remove
to remove your
scanner software.
5. Insert your scanner CD-ROM in
your CD-ROM drive.
6. Double-click the
My Computer
icon on your desktop, then
double-click the CD-ROM icon.
From the EPSON window that
appears, double-click the
EPSON
icon.
7. On the Main Menu, select
Re-install Scanner Software
.
8. On the Re-install screen, click the
Re-install EPSON Scanner
Software
button.
9. At the restart message, click
OK
.
10. After your computer restarts, you
see the Add New Hardware
Wizard screen.
Follow steps 3 through 9, starting
on page 14 to reinstall your
scanner software.
If you need to reinstall your
scanner software on a
Macintosh . . .
1. Insert your scanner CD-ROM in
your CD-ROM drive.
2. Double-click the
EPSON
icon.
3. On the Main Menu, select
Re-install Scanner Software
.
4. On the Re-install screen, click the
Re-install
button.
5. Follow the steps on screen to
reinstall your scanner software.