EPSON Perfection 1650/1650 PHOTO
7/01 EPSON Perfection 1650/1650 PHOTO - 5
Scanner Light
The scanner has one indicator light. (The indicator light is part
of the
] Start button.)
The
] light indicates the status of the scanner, as described
below.
Related Documentation
CPD-12466 EPSON Perfection 1250/1650 Start Here
poster
CPD-12467 EPSON Perfection 1250/1650 Scanner
Basics
CPD-12468 EPSON Perfection 1250/1650 scanner
software CD-ROM
— Reference Guide (HTML)
— EPSON Smart Panel User’s Manual
(HTML)
TM-PERF1650 EPSON Perfection 1650/1650 PHOTO
Service Manual
PL-PERF1650 EPSON Perfection 1650 Parts List
PL-PHOTO1650 EPSON Perfection 1650 PHOTO Parts
List
PL-B813172 Optional Transparency Unit Parts List
Light Color Status
On Green The scanner is ready to scan images.
Flashing Green The scanner is initializing or is busy
scanning.
Flashing Red If you are using the EPSON Perfection
1650 PHOTO and are scanning
transparencies, make sure you’ve removed
the reflective document mat.
The scanner may not be properly
connected to the computer. Unplug the
scanner from its power source, remove the
USB cable, and then plug them back in.
If this does not eliminate the error, one of
the following may be the problem and you
need to consult your dealer or EPSON:
❏ The fluorescent lamp needs to be
replaced.
❏ The scanner is malfunctioning.
Off — The scanner or AC adapter is unplugged.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
