34
Using the Optional Battery
To buy the optional battery, check with your
PictureMate retailer or go to www.MyPictureMate.com.
See page 53 for more information on purchasing
PictureMate supplies and accessories.
With a fully charged battery, you can print about 100
photos.
Installing the Battery
1
Make sure PictureMate is turned off.
2 Unplug the AC adapter from PictureMate.
3 Release the latch and remove the battery cover
from the back of the printer.
4 Insert the battery as shown until it clicks into
place.
Charging the Battery
After you install the battery, you need to charge it by
connecting the AC adapter and plugging in the printer.
To Next Page
Loading...
