39
9 At the confirmation screen, press OK again.
Returning to Default Settings
You can return all settings to the PictureMate original
default settings.
1 Press Menu.
2 Press l or r to highlight Setup, then press OK.
3 Press l or r to highlight Restore Defaults, then
press OK. You see this message:
4 Press l or r to select Yes or No, then press OK.
5 Press OK to exit.
Encryption On/Off
(default = Off)
Select On to encrypt
communication and require
that a four-digit Passkey be
entered into a device before
it can print from PictureMate.
Passkey Any four-digit
number
(default =
0000)
This setting allows you to set
a four-digit Passkey that must
be entered into a device
before printing if Pairing is
selected as the
communication mode or if
Encryption is On.
Option Settings Description
To Next Page
Loading...
