Epson PICTUREMATE PM 225 - Set PictureMate Preferences

36
You can change the way PictureMate works by using
the Setup menu. You can set the following
preferences:
● Turn the print preview screen off or on (on the
right)
● Turn on a screensaver that will appear after 3
minutes of inactivity (see page 37)
● Change PictureMate’s language to French,
Portuguese, or Spanish (see page 37)
● Make settings for Bluetooth printing (see page 37)
● Return the settings to their defaults (see page 39)
Turning Print Preview Off or On
When you press the Print button, you see a screen
that lets you confirm your selected photos and
settings, for example:
Then you press Print again to start printing.
If you don’t want to see this screen before printing,
you can turn it off. You will only need to press Print
once to start printing.
1 Press Menu.
2 Press l or r to highlight Setup, then press OK.
Set PictureMate Preferences