29
1 Make sure PictureMate is on but not printing.
Caution: Do not connect or remove the Bluetooth Photo
Print Adapter while it is communicating with a device or
while PictureMate is printing; this may cause PictureMate
to malfunction.
2 Plug the adapter into the port on the side of
PictureMate.
3 Make sure you are within about 30 feet of
PictureMate.
4 Select the photo you want to print from your
Bluetooth device and send it to PictureMate:
● Windows
®
: Send photos directly to
PictureMate with your Bluetooth file sharing
program. See the documentation included
with your Bluetooth adapter for details.
● Macintosh
®
: Double-click Bluetooth File
Exchange in your Utilities folder. Follow the
on-screen instructions.
● Mobile devices: See your product’s
documentation for instructions on setting up
Bluetooth file sharing and sending files.
If you see a Bluetooth error message on the
PictureMate screen, try printing the photo from a
memory card or your computer instead.
Note: For instructions on selecting PictureMate’s Bluetooth
settings, see page 30.
Disconnecting the Adapter
Make sure PictureMate is not printing, then pull the
adapter out of its port.
To Next Page
Loading...
