Connecting to a Projector on a Network and Projecting
16
Screen Preview
Displays the multi-screen preview screen.
Click to display a preview with the settings you have
made. Click each display to enlarge each Screen Preview to
full-screen.
Set options
Transmission performance during the transfer of computer
images can be adjusted.
s "Set options" p.34
Movie Sending Mode
Used to immediately play back a movie file. If the projector
cannot play back movies, the message The connected
projectors do not support Movie Sending. is displayed.
Disconnect
Disconnects the connection to the projector.
Signal intensity (Quick Connection Mode only)
This is displayed when the connection is made in Quick
Connection Mode. As the Signal intensity increases, so does
the number of lit indicators.
Switch toolbar display
The toolbar display is switched as follows. The toolbar display
remains as is until switched again.
Full
Normal
Simple
To Next Page
Loading...
Need help?
General